• Make sure you are ON-LINE & connected to the Internet at the minimum speed of 28.8 kbps.  Net2Phone will not function properly at speeds below 28.8 kbps. 
  
  
• Make sure all other windows/programs are CLOSED, even your internet browser as this may interfere with clear transmission.
  
  
• Open your Net2Phone program by  Double-clicking the IDT Net2Phone icon on your WIN95 screen. The Net2Phone window will appear.
  
  
• In the "white box", enter desired number you wish to call (Net2Phone Service #'s: 90 or 1-800-438-8879 are FREE calls)

      -   US, Canada,  Caribbean Islands are dialed = "1" + area code + number
      -   ALL Other Countries = "011" + country code + area code +  number. 

*For access to Country & City Codes Worldwide go to:

• Click "CALL" icon button on the Net2Phone screen or hit Enter key on your keyboard.
  
  
• You will be prompted to enter your personal PIN number as assigned to you with your 12-digit  number. In order to avoid the need for PIN entry every time you wish to place a call, Click & Check  "SAVE PIN TO DISK" before  entry.
  
  
• You will be prompted on-screen regarding your remaining balance and talk-time for that call,   along with  Yes or No prompt to place the call. Click "YES" to process your call.
  
  

     NOTE: Net2phone is best utilized with a full-duplex sound card.
     If you have a half-duplex card, turn the VOX button OFF, press
     the space bar on your keyboard, or the PUSH TO TALK button
     found on your Net2Phone to speak, and release to listen. 


• If you have a Half Duplex system (depending on your Sound Card), a button will be on your Net2Phone screen labeled "PUSH TO TALK". When you hear the other party answer your call  and you wish to talk, make sure you Click (continuously without releasing)  the "PUSH TO TALK" button OR Press down Space Bar whenever you want to  talk and release the button/bar when you want to hear.  This  is quite similar to the way you'd talk on an intercom or walkie-talkie. Inform the party that both of you cannot talk simultaneously.  Also keep your eyes on the screen you will see the word   "LISTEN" & "TALK" depending if the "PUSH TO TALK" button or Space Bar  is pressed down.

• If you have a Full Duplex System (depending on your Sound Card), on top menu bar Click PHONE, in drop list that appears make sure there is a "check mark" next to FULL DUPLEX.   You will be able to talk and  listen to the other party without pressing any button since no "PUSH TO TALK" button will  appear on your screen. This is like talking Handsfree. Read the other additional instructions on to Sound Test to  receive the best voice transmission possible.
  
  
• Make sure after finishing the call to hang up by Clicking the "HANGUP" icon/picture of "arrow pointing phone down".

 
Thank You for using Net2Phone.
 
Attn:  Sally Sta. Maria
E-mail Address:   tashly@cybergal.com